EVALUATION OF THE EFFECTIVENESS OF THE MALTESE MECHANISM IN THE DRIVE OF A ROTARY TILLER
https://doi.org/10.26897/2687-1149-2021-1-41-45
Abstract
The study focuses on a model of the KFG-3.6 rotary tiller with the Maltese-cross mechanism in the horizontal-axis rotary tiller drive. The continuous-rotation Maltese mechanism of external hooking allows reducing the knife speed when the knife penetrates into the soil. This kind of tillage minimizes erosion of the soil in dry areas. The study purpose is to determine the rational number of fingers, cross-wheel slots and knives on one side of the flange, providing a predetermined quality of soil tillage. It has been established that the Maltese-cross mechanism including a three-finger carrier gear and a cross with six slots is preferable among all the existing options.
About the Authors
MIKHAIL I. Belov
Russian State Agrarian University - Moscow Timiryazev Agricultural Academy
Russian Federation
Russian Federation
OLEG M. Melnikov
Russian State Agrarian University - Moscow Timiryazev Agricultural Academy
Russian Federation
Russian Federation
References
1. Beeny J.M.& Khoo D.C. 1970. Preliminary investigations into the performance of different shaped blades for the rotary tillage of wet rice soil. Journal of Agricultural Engineering Research. 15(1), 27-33.
2. Hendrick J.G. and W.R. Gill. 1978. Rotary-tiller design parameters: Part V. Kinematics. Transections of the ASAE21(4): 658-664.
3. Celik A., S. Altikat. 2008. Geometrical analysis of the effects of rotary tiller blade path on the distribution of soil slice size. Applied Engineering in Agriculture. Vol. 24(4): 409-413.
4. Рамазанова Г.Г., Белов М.И., Гаджиев П.И. Обоснование профиля рабочей поверхности ножа фрезы для обработки почвы // Техника и оборудование для села. 2016. № 2. С. 32-37.
5. Belov M. 2018. Kinematics of twin rotary tiller. Agricultural Engineering International: CIGR Journal, 20(4): 91-96.
6. Бышов Н.В., Белов М.И., Славкин В.И. Применение мальтийского механизма в приводе почвенной фрезы и компьютерная модель движения ножей // Вестник Рязанского ГАУ им. П.А. Костычева. 2018. № 3. С. 68-72.
7. Белов М.И. Высота гребня и длина дуги резания почвенной фрезы с мальтийским механизмом в приводе // Вестник ФГОУ ВПО «МГАУ имени В.П. Горячкина». 2019. № 2 (90). С. 4-7.
8. Белов М.И., Сорокин С.В. Теория механизмов и машин. 2-е изд., перераб. и доп. М.: ИНФРА-М, 2018. 322 с.
Review
For citations:
Belov M.I., Melnikov O.M. EVALUATION OF THE EFFECTIVENESS OF THE MALTESE MECHANISM IN THE DRIVE OF A ROTARY TILLER. Agricultural Engineering (Moscow). 2021;(1):41-45. (In Russ.) https://doi.org/10.26897/2687-1149-2021-1-41-45
Views:
78
Email this article 