Preview

Agricultural Engineering (Moscow)

Advanced search

JET MODEL OF VENTILATION AIR INFLOW FROM HEAT-RECOVERY UNIT

https://doi.org/10.26897/1728-7936-2018-2-28-32

Abstract

The paper considers a jet model of the ventilation air inflow from a heat recovery unit. Athe authors proceed from an assumption that the inflow and exhaust of ventilation air is produced mechanically with axial fans; supply air enters the room directly from the fan without nozzles and air ducts, which forms a suction plume and a supply jet. Taking into account Archimede's buoyant force and general laws of jet streams, the authors have designed a model of indoor air distribution, which makes it possible to determine axial velocity of the jet at a distance from the outlet and estimate the trajectory of the jet propagation. The adequacy of the design model has been tested experimentally in the fattening section of a pig farm of LLC “Mortadel”. In the considered case, the inflow air featured a temperature lower than the indoor one, which led to a deviation of the jet trajectory in the direction of gravity. The adequacy, reliability and accuracy of the model comply with the accuracy required for practical calculations. The paper provides graphical dependencies of the jet velocity and the distance from the outlet. The obtained model allows calculating the trajectory of the jet motion, which enables us to implement the flow vector correction algorithm to ensure the required range in current weather conditions. It has been established that the discrepancy between theoretical and experimental data does not exceed 12.9%. The accuracy of the results depends to a large extent on the empirical coefficients that determine the velocity change rate and the temperature difference in the jet. In the future, it is planned to study the profiles of the suction plume and the supply jets in longitudinal and cross sections.

About the Authors

VLADIMIR V. Kirsanov
Russian Timiryazev State Agrarian University
Russian Federation


IVAN Yu. Ignatkin
Bauman Moscow State Technical University
Russian Federation


References

1. Механизация и технология животноводства / В.В. Кирсанов, Д.Н. Мурусидзе, В.Ф. Некрашевич, В.В. Шевцов, Р.Ф. Филонов: Учебник. М., 2013. 585 с.

2. Гулевский В.А., Шацкий В.П., Спирина Н.Г. Применение теплообменников (рекуператоров) для нормализации микроклимата животноводческих помещений // Известия ВУЗов. Строительство. Новосибирск. 2013. № 9. С. 64-68.

3. Гулевский В.А., Шацкий В.П. Моделирование теплообмена в пластинчатых теплообменниках // Вестник Воронежского государственного аграрного университета. 2012. № 2. С. 140-144.

4. Кирсанов В.В., Игнаткин И.Ю. Энергоэффективная автоматизированная система микроклимата // Вестник ФГОУ ВПО «МГАУ имени В.П. Горячкина». 2016. № 6 (76). С. 48-51.

5. Игнаткин И.Ю., Казанцев С.П. Рекуператор теплоты для свиноводческого комплекса // Механизация и электрификация сельского хозяйства. 2013. № 4. С. 17-18.

6. Кононенко А.С., Киселев Р.В. Восстановление радиаторов // Сельский механизатор. 2004. № 6. С. 22-23.

7. Кирсанов В.В., Игнаткин И.Ю. Универсальная установка обеспечения микроклимата // Вестник НГИЭИ. 2016. № 8 (63). С. 110-116.

8. Кузьмин М.С., Овчинников П.А. Вытяжные и воздухораспределительные устройства. М.: Стройиздат, 1987. 168 с.

9. Иванов О.П., Мамченко В.О. Аэродинамика и вентиляторы: Учеб. для студентов вузов, обучающихся по специальности «Холодильные и компрессорные машины и установки». Л.: Машиностроение, Ленингр. отд-ние, 1986. 280 с.

10. Гримитлин М.И. Распределение воздуха в помещениях. СПб.: АВОК Северо-Запад, 2004, 337 с.

11. Игнаткин И.Ю., Бондарев А.М., Курячий М.Г., Путан А.А., Архипцев А.В. Опыт внедрения системы рекуперации тепла вентиляционного воздуха в систему поддержания микроклимата в свинарнике ООО "Фирма "Мортадель" // Инновации в сельском хозяйстве. 2014. № 4 (9). С. 256-261.


Review

For citations:


Kirsanov  V.V., Ignatkin I.Yu. JET MODEL OF VENTILATION AIR INFLOW FROM HEAT-RECOVERY UNIT. Agricultural Engineering (Moscow). 2018;(2):28-32. (In Russ.) https://doi.org/10.26897/1728-7936-2018-2-28-32

Views: 48


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2687-1149 (Print)
ISSN 2687-1130 (Online)