STUDY OF SEEDBED PREPARATION WITH ROD-TYPE SOIL COMPACTION ROLLER
https://doi.org/10.26897/2687-1149-2020-2-9-16
Abstract
Potato is an important food product, and there is a growing demand for it, according to the UN FAO statistics. Modern potato varieties are evaluated for at least 40 economically valuable characteristics in the process of selection and seed production. It is early products that are of great commercial value. In order to reduce the damage caused to tubers during harvesting, and especially that of the large ones, when directly exporting potatoes from the field to the consumers or to the retail network, the authors propose to improve the design of a potato digger. The experimental potato digger, while passing along the ridge, forms two parallel stacked rows: one of them having tubers of a large fraction Field experience tab, records and observations were made in accordance with the field experiment methodology requirements and the “Potato Research Methodology”. The authors made a comparative assessment of an experimental potato digger with KTN-2B by damage caused to potato tubers of the Zhukovsky Early variety, heap purity and tuber selection productivity. Comparative tests of the experimental digger have shown that a potato digger performing calibration and harvesting operations complies with agrotechnical requirements for the heap purity and tuber damage on different soil types. The use of the improved potato digger leads to an increase in the selection performance by 20…30% and reduced damage to tubers by 25…30% and simplifies the technology of direct delivering potatoes from the field to the consumer.
About the Authors
NIKOLAY V. AldoshinRussian Federation
ALEKSANDR S. Vasiliev
Russian Federation
ANDREI V. Kudryavtsev
Russian Federation
VYACHESLAV V. Golubev
Russian Federation
ALEKSEI YU. Alipichev
Russian Federation
References
1. Дьячков А.П., Шацкий В.П., Колесников Н.П. Применение системного подхода при исследовании операционной технологии и технических средств внесения дефеката // Вестник Воронежского государственного аграрного университета. 2013. № 1. С. 101-109.
2. Шишлов С.А. Повышение эффективности предпосевной подготовки почвы и посева сои в условиях Приморского края: автореф. дис.. д-ра. техн. наук. Благовещенск, 2016. 42 с.
3. Артюшин А.А., Ковалёв М.М., Ущаповский И.В. Исходные требования на технологию возделывания льна-долгунца с учётом принципов точного земледелия. Тверь: ФГБНУ ВНИИМЛ, 2011. 16 с.
4. Шапарь М.С. Совершенствование процесса прикатывания почвы под сою виброкатком в условиях Приморского края: дис.. канд. техн. наук. Уссурийск, 2015. 155 с.
5. Голубев В.В., Сафонов В.В. Исследование деформации почвы под действием трубчатого катка // Вестник ФГОУ ВПО «МГАУ имени В.П. Горячкина». 2006. № 5. С. 85-86.
6. Голубев В.В., Фирсов А.С. Обоснование последовательности технологических операций при посеве льна-долгунца // Вестник НГИЭИ. 2015. № 2. С. 24-28.
7. Никифоров М.В., Голубев В.В., Кудрявцев А.В. Анализ конструктивных особенностей рабочих органов для выравнивания почвы при посеве мелкосеменных культур // Конкурентоспособность и инновационная активность АПК регионов: Сб. науч. тр. по матер. науч.-практ. конф. 6-8 февраля 2018 г. Тверь: ТГСХА. С. 200-203.
8. Панов И.М., Ветохин В.И. Физические основы механики почв. Киев: Феникс, 2008. 267 с.
9. Морозов П.В., Андреев А.Н., Голубев В.В. Методика проведения лабораторного эксперимента ротационного выравнивающего органа // Инновационные подходы к развитию науки и производства регионов: Сб. науч. тр. по матер. Национ. науч.-техн. конференции. Тверь: Тверская ГСХА. 2019. С. 238-242.
10. Никифоров М.В., Голубев В.В. Определение критерия качества предпосевной обработки почвы при использовании различных почвообрабатывающих машин // Вестник ФГБОУ ВПО «МГАУ имени В.П. Горячкина». 2018. № 6. С. 11-16. DOI 10.26897/1728-7936-2018-6-11-16
11. Bakhadir Mirzaev, Farmon Mamatov, Nikolay Aldoshin, Mansur Amonov. Antierosion two-stage tillage by ripper // Proceeding of 7th International Conference on Trends in Agricultural Engineering 2019 - Czech University of Life Sciences Prague - Faculty of Engineering, p. 391-395. ISBN978-80-213-2953-9.
12. Алдошин Н.В., Исмаилов И.И. Разработка технологии подготовки почвы к посеву бахчевых культур // Вестник ФГБОУ ВПО «МГАУ имени В.П. Горячкина». 2018. № 6(88). С. 17-23. DOI 10.26897/1728-7936-2018-6-17-23
13. Доспехов Б.А. Методика проведения полевого опыта. М.: Агропромиздат, 1985. 352 с.
14. Мазиров М.А., Шеин Е.В., Корчагин А.А. и др. Полевые исследования свойств почв. Владимир: Изд-во ВлГУ 2012. 72 с.
15. Доспехов Б.А., Васильев И.П., Туликов А.М. Практикум по земледелию. М.: КолосС, 1987. 383 с.
Review
For citations:
Aldoshin N.V., Vasiliev A.S., Kudryavtsev A.V., Golubev V.V., Alipichev A.Yu. STUDY OF SEEDBED PREPARATION WITH ROD-TYPE SOIL COMPACTION ROLLER. Agricultural Engineering (Moscow). 2020;(2):9-16. (In Russ.) https://doi.org/10.26897/2687-1149-2020-2-9-16