Analysis of dimensional characteristics of maize and sunflower seeds

The efficiency of agricultural machinery used in the cultivation of row crops – most notably sunflower and maize – depends significantly on how well the operating parameters match the physical and dimensional characteristics of the seeds. This study aims to analyze the dimensional properties of seeds from modern sunflower and maize hybrids (varieties). The research involved measuring the primary dimensions of twelve maize hybrids and seven sunflower varieties/hybrids recommended for the Central Black Earth and North Caucasus regions of the Russian Federation, followed by statistical analysis. The findings indicate that maize seeds have average dimensions of 11.0 mm (length), 8.4 mm (width), and 5.1 mm (thickness), with inter-hybrid variability ranging between 8.1% and 9.7%. Correlation analysis revealed no significant relationship between length and width or width and thickness; however, an inverse correlation was observed between seed length and thickness. Sunflower seeds exhibited average dimensions of 11.7 mm, 6.1 mm, and 3.8 mm for length, width, and thickness, respectively, showing a direct correlation across all primary dimensions. For process modeling purposes, maize seeds can be approximated as ellipsoids of revolution with the axis of rotation corresponding to thickness, while sunflower seeds are best represented as ellipsoids rotating about their longitudinal axis. These dimensional characteristics are applicable for selecting rational parameters of seed-cleaning screens, grading machinery, indent cylinders, and the diameters of metering elements in precision seeders.

1. Aldoshin N.V., Zolotov A.A., Tsygutkin A.S., Lylin N.A. Harvesting binary grain crops. Vestnik of Federal State Educational Establishment of Higher Professional Education “Moscow State Agroengineering University named after V.P. Goryachkin”. 2016;3(73):11-17. (In Russ.)

2. Aldoshin N.V., Zolotov A.A., Tsygutkin A.S., Suleev V.D., Kuznetsov A.E., Aladjev N.A., Malla Bahaa. Substantiation of technological parameters of harvesters for white lupine. Achievements of Science and Technology of the Agro-Industrial Complex. 2015;29;1:64-66. (In Russ.)

3. Aldoshin N.V., Zolotov A.A., Tsygutkin A.S., Aladyev N.A., Malla B., Suleev V.D., Kuznetsov A.E. Assessment of white lupine damage during harvesting. Tractors and Agricultural Machinery. 2015;2:26-29. (In Russ.)

4. Khizhnyak V.I., Shchirov V.V., Nesmiyan A.Y., Avramenko F.V., Kochergin A.S. Evaluation of the efficiency of row-crop seeders using vacuum and extrabaric seed metering methods. In: IOP Conference Series: Earth and Environmental Science. Ser. “International Conference on Engineering Studies and Cooperation in Global Agricultural Production” 2021:012045. https://doi.org/10.1088/1755-1315/659/1/012045

5. Orobinsky V.I., Vorokhobin A.V., Kornev A.S., Golovin A.D., Bachurin I.G., Pozhidaev I.A. Fraction composition of the grain heap and its influence on the level of grain damage and sowing qualities of seeds. Vestnik of Voronezh State Agrarian University. 2021;14;3(70):12-17. (In Russ.)

6. Borisenko I.B., Meznikova M.V., Ulybina E.I. Trends for the development of strip technology in row crop production. Paradigma agrarnogo obrazovaniya v usloviyakh tsifrovoy ekonomiki = Paradigm of agricultural education in the context of the digital economy: Proceedings of the International scientific and practical conference. 2019:279-283. (In Russ.)

7. Zakharov A.M., Murzaev E.A. Impact of inter-row cultivation on potato tuber yields in organic farming. Agricultural Machinery and Technologies. 2024;18;1:74-80. (In Russ.) https://doi.org/10.22314/2073-7599-2024-18-1-74-80

8. Vorotnikov I.L., Rozanov A.V., Bogatyrev S.A., Gutuyev M. Sh. Results of modeling the influence of the parameters of strip tillage on the yield of grass crops. Scientific Life. 2021;16;3(115):350- 358. (In Russ.)

9. Baranovskiy I.A. Physico-mechanical and aerodynamic properties of sugar beet and maize seeds. In: Agrarnaya nauka – sel’skokhozyaystvennomu proizvodstvu Sibiri, Mongolii, Kazakhstana, Belarusi i Bolgarii = Contribution of Agrarian Science to Agricultural Production of Siberia, Mongolia, Kazakhstan, Belarus, and Bulgaria: Proceedings of the XXIII International Scientific and Technical Conference. Minsk; 2020:326-330. (In Russ.)

10. Ivanova Z.A., Shogenov Yu.M., Nagudova F.Kh. Technological properties of grain and seeding qualities of corn in dependence ofx drying methods. Sovremennye problem nauki i obrazovaniya. 2014;(5):750. (In Russ.)

11. Buenkov A.Yu., Kudryashov S.P. Changing of seed amount and 1000 seeds weight by years, their impact on seed yield of sunflower varieties. Oil Crops. 2023;3(195):12-18. (In Russ.)

12. Krivosheev G.Ya., Ignatiev A.S., Lupinoga D.R., Arzhenovskaya Yu.B. Comparative study of simple interline and three-way cross maize hybrids. Grain Economy of Russia. 2022;(4):70-77. (In Russ.) https://doi.org/10.31367/2079-8725-2022-82-4-70-77

13. Krivosheev G.Ya., Shevchenko N.A., Ignatiev A.S. The results and prospects of maize breeding in the Agricultural Research Center “Donskoy”. Grain Economy of Russia. 2020;(6):32-38. (In Russ.) https://doi.org/10.31367/2079-8725-2020-72-6-32-38

14. Nesmiyan A., Khizhnyak V., Kravchenko L., Zubrilina E. Probabilistic modeling for dynamic processes. E3S Web of Conferences. 13th International Scientific and Practical Conference on State and Prospects for the Development of Agribusiness, INTERAGROMASH 2020. EDP Sciences, 2020:05019. (In Russ.)

15. Khizhnyak V.I., Maltsev P.S., Nesmiyan A.Yu., Kormiltsev Yu.G., Khizhnyak D.V. Theoretical study of the seed metering process using a forced airflow. Don Agrarian Science Bulletin. 2021;4(56):46-54. (In Russ.)

16. Tsybulevsky V.V., Matuschenko A.E., Poluektov A.A. Determination of the hole sizes of seed cells. Izvestiya Orenburgskogo gosudarstvennogo agrarnogo universiteta. 2021;3(89):112-115. (In Russ.)